Fix HP pen drive not able to format

Just download HP Format utility .. if not getting then pl comment I will share you in  G-drive link

Fix Transcend write protect error.

I had spent a lot of time with lots and lots of trick but this would definitely work

For the users of Transcend, a simple step-by-step protocol needs to be followed for removing the write protection. It is required to simply go to the Transcend download centre and download the 'mFormat' utility. To do this, the model number being searched for is typed, and this is followed by providing other details regarding the type of product being searched. It is then required to search for the concerned product from the search list, followed by downloading the 'mFormat' utility. If the serial number is unknown, 1456784523 must be used as an alternative. The pen drive then needs to be connected and 'mFormat' utility needs to be run after selecting the 'full format' option, thereby removing the write protection. 

[Transcend USB key] write protection error

Steps to remove write protection for Transcend users: •1) Go to the download centre of the Transcend, here is the link: http://www.transcendusa.com/Support/DLCenter 

•Type the model no. or part of model number you are looking for. •example: JFV30 (all letters in Caps) 

•2) Choose other details like product type etc. and search for your product. 
•3) Then select the product which which is most similar to yours from the search results. 
•4) Then download the mFormat utility You can search in google for download  . You will asked for a serial number. If you don't have one, enter this no.: 1456784523 
•5) Connect your pen drive 
•6) Run the mformat utility and select full format.
•7) After full format your write protection will be removed (try several times if needed).


Thanks to Ambucias for this tip.

Virtual Router - Wifi Hot Spot issue fix.

Here you will find the soln for the most occurred issue for Internet Sharing for

Virtual Router - Wifi Hot Spot for any version of windows

 Listed Issue

1..Virtual Router could not be started

2..Group or resource is not in the correct state to perform the requested operation.

>> The solution form vaibhav definitely work 

1. Go to device manager.

2. Click on view and press on "show hidden devices".

3. Go down to the list of devices and expand the node "Network Devices" .

4. Find an adapter with the name "Microsoft Hosted Network Virtual Adapter" and then right click on it.

5. Select Enable

6. This will enable the AdHoc created connection, it should appear in the network connections in Network and Sharing Center, if the AdHoc network connection is not appear then open elevated command prompt and apply this command "netsh wlan stop hostednetwork" without quotations.

7. After this, the connection should appear.
try .... you can definitely use

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

>>Virtual Router could not be started

-when first started sometimes it will say " Virtual Router could not be started ".

 sol: based on my experience just try it again. click the ok button again and click the refresh button in the VirtualRouter GUI

       and then choose what type of shared connection you want. Then the problem is solved!!!. It is now working..but some will say their

      devices can connect to the VirtualRouter but with no internet connection, so it will lead to another problem which is B.

>> Why there is no internet services in my device(mobile/PC/LAPTOP) while it is said that I have a connection in  my VirtualRouter?

-This is also my main problem when I first started the VirtualRouter. I can connect to the VirtualRouter but with no internet access.

sol: based on my experience this is what I did:

     1. Go to Control Panel and then click " NETWORK and INTERNET"

     2. Click " NETWORK and SHARING CENTER" and Click "Change adapter settings"

     3. Make sure that your original connection thru internet does share its connection to your Wireless Network Connection 2"

     in my case my "Broadband Connection" is shared. To do this I double click my "Broadband Connection" and click Properties

    then go to "Sharing Tab" then click the box "Allow other network users to connect through this computer's internet connection"

   then choose "Wireless Network Connection 2". Then Click "OK".

    4. It will prompt "Since this connection is currently active,some settings will not take effect until the next time you dial it" then just dial again

    your connection.

     5. Then now you have a connection!!!

Some will say that when they look into the connection it is said No internet access but don't worry because that's not true it is not only updated in the changes hehe!!... but if you want to see the word "Internet Access" just redo the letter A.) statement. no need to disconnect again.

 3.) Still Having Problems? then do the manual thing.

 - actually as i read the articles in the other forums I learned that making your laptop/pc a virtual router is one advantage of using Windows 7 so it means that

 even though you  don't use VirtualRouter you can still make your Laptops/PC a VirtualRouter. So why do we need to use Virtual Router? actually for me it is only intended for easy use or for GUI purposes since it is impractical to type many words in command prompt especially if you are a newbie in PC thing.

Sol: before starting make sure you disconnect your internet connection.

     note: do the letter B.) before you proceed below

      1. Go to "Command Prompt" you may type "cmd" in the search bar.

      2. then type the following:

         netsh wlan set hostednetwork mode=allow ssid=VirtualRouter key=123456789

      3. Enter

      3. then type :

      netsh wlan start hostednetwork

      4. Then connect to internet

       5. Then You already have a Wireless Access Point..

note: ssid is the name of your wifi so you can change the VirtualRouter in any name you want.

   key is your password so you can change the value 12345678 in any password you want.

Registry editing has been disabled by administrator.

 Virus takes control on regedit

Firstly, check the local admin group to make sure you are the only one who has the local administrator privilege.

Secondly, update this Group Policy to restrict access to Windows Registry editor Regedit.exe. You can do this by

1. Press WIN + R, type gpedit.msc, and click OK to launch Local Group Policy Editor.

2. Navigate the left panel to User Configuration → Administrative Template → System

3. Double click Prevent Access to Registry Editing Tools at the right panel, click the Enable radio button, and click OK to save the settings.